Item Number: EVC005
This connector features resistance to oils and coolants, as well as increased protection for the demands of harsh industrial environments. The device ensures a permanent and reliable seal even when installed without tools. It is also resistant to shock and vibration thanks to the connecting ring with a locking mechanism.
Item Number: AC2474
Materials : PA; socket: brass nickel-plated; threaded inserts in the lower part: brass nickel-plated; O-ring: FKM; piercing contacts: CuSn6 nickel-plated and tin-plated; Module connection : Flachkabel; Items supplied : stainless steel sleeve for installation in case of high mechanical stress , E70402; Connector: M12.
Item Number: AL1122
The IFM AL1122 IO-Link master is a reliable high performance device with reliable transmission of machine data processing parameters and diagnostic data to the PLC. It has built-in EtherNet/IP interface and up to eight IO-Link devices can be connected to it. The rugged housing allows it to be used in harsh industrial environments.
Item Number: DI0104
The IFM Electronic inductive sensor marked DI0104 detects the rotation speed without contact and, if it drops below the set value, signals it with an output signal. The DI0104 speed sensor has a standard M30 housing and is connected with a 2 m cable. The DI0104 speed sensor controls the range from 5 to 3600 imp/min. The switching point is set using a potentiometer on the housing.
Item Number: KI5309
Easy reach adjustment. High degree of protection adapted to the requirements in harsh industrial environments. Use in high temperature fluids. For position detection or level control.